ChemBK
  • Home
  • Product Category


SILICON (IV) FLUORIDE

Silicon Tetrafluoride

CAS: 7783-61-1

Molecular Formula: F4Si

  1. Home
  2. Product Category
  3. Inorganic chemical engineering
  4. inorganic salt
  5. SILICON (IV) FLUORIDE

SILICON (IV) FLUORIDE - Names and Identifiers

Name Silicon Tetrafluoride
Synonyms UN1859
HSDB 684
Perfluorosilane
Silicon fluoride
TETRAFLUOROSILANE
Tetrafluorosilane
Silane, tetrafluoro-
SILICON TETRAFLUORIDE
Silicon Tetrafluoride
SILICON (IV) FLUORIDE
Silicon tetrafluoride
SILICIUM TETRAFLUORIDE
Silicon fluoride (SiF4)
Silicon tetrafluoride, compressed
Silicon tetrafluoride, compressed [UN1859] [Poison gas]
CAS 7783-61-1
EINECS 232-015-5
InChI InChI=1/F4Si/c1-5(2,3)4

SILICON (IV) FLUORIDE - Physico-chemical Properties

Molecular FormulaF4Si
Molar Mass104.08
Density1.66
Melting Point-90°C
Boling Point-86 °C
Water Solubilityhydrolyzed by H2O [AIR87]
Vapor Presure3517.191kPa at 25℃
Appearancecolorless gas
Specific Gravity1.66
Merck13,8575
Sensitive8: reacts rapidly with moisture, water, protic solvents
Refractive Index1.207
Physical and Chemical PropertiesSilicon tetrafluoride is also known as "tetrafluorosilane". Discovered in 1771 by the famous Swedish chemist Scheele. Chemical formula sif4. Molecular weight 104.08. Colorless gas, asphyxiating odor, toxic! Melting Point -90.2 °c, boiling point -86 °c, -95.2 °c sublimation. Critical temperature -14.15 °c. Critical pressure 3.715MPA. The relative density was 4.69. Soluble in anhydrous ethanol, hydrofluoric acid and nitric acid, insoluble in ether. In the humid air hydrolysis, hydrogen fluoride and silicic acid and the formation of smoke, water hydrolysis, the formation of raw silicate H4SiO4 and hydrofluoric acid, hydrofluoric acid generated by hydrolysis with non-hydrolyzed Silicon tetrafluoride complexed fluorosilicic acid. Pure fluorosilicic acid is not present, because of its easy decomposition, only 60% of its aqueous solution can be prepared. Fluosilicic acid is stronger than sulfuric acid, is a kind of strong acid. With carbon, phosphorus, iodine and other non-metallic and zinc, Mercury, hydrogen sulfide, molten potassium chloride, anhydrous alkali metal carbonate and borate almost no reaction. Can stop the oxidation of magnesium in the air. Reaction with potassium and sodium under hot conditions produces a mixture of silicon, potassium, sodium fluoride and fluorosilicate. The reaction with aluminum chloride produces silicon tetrachloride at a high temperature.
preparation method: it can be obtained by reacting concentrated sulfuric acid with silica and calcium fluoride, or by decomposing fluorine-containing phosphate ore with concentrated sulfuric acid. To obtain extremely pure silicon tetrafluoride, fluorosilicate can be thermally decomposed: BaSiF6 = BaF2 + sif4.
purposes: for the preparation of organic silicides, fluorosilicic acid and aluminum fluoride, but also for chemical analysis, oil drilling, catalysts, such as fumigant.
FIG. 1 shows the molecular structure of silicon tetrafluoride.

SILICON (IV) FLUORIDE - Risk and Safety

Risk CodesR26 - Very Toxic by inhalation
R35 - Causes severe burns
R34 - Causes burns
R31 - Contact with acids liberates toxic gas
R26/27/28 - Very toxic by inhalation, in contact with skin and if swallowed.
R14 - Reacts violently with water
Safety DescriptionS7/9 -
S24/25 - Avoid contact with skin and eyes.
S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.)
S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S23 - Do not breathe vapour.
UN IDs1859
WGK Germany3
RTECSVW2327000
TSCAYes
Hazard NoteToxic/Corrosive
Hazard Class2.3

SILICON (IV) FLUORIDE - Reference Information

EPA chemical substance information information provided by: ofmpeb.epa.gov (external link)
hazard characteristics non-flammable. It can be easily hydrolyzed into fluorosilicic acid, which forms hydrogen fluoride in humid air. It is asphyxiating, irritating and corrosive. Serious damage to the eyes, skin, mucous membranes and respiratory system. Local corrosion strong, can cause decalcification poisoning, after a long period of pain and disability. Inhalation experience caused by Dyspnea, pulmonary edema and chemical Pneumonia. At the same time visible tooth erosion caused by decalcification, due to fluoride chronic poisoning lead to bone sclerosis. Rats inhaled LC50300ppm. After heating, the pressure in the bottle increases, and there is a risk of explosion. This information was edited by chemical book Xiaonan (2015-08-17).
instructions for storage and transportation in special steel bottles, stored in a cool and ventilated warehouse. Stay away from heat and fire sources. Prevent moisture and rain. "Toxic gases and corrosion products" shall be marked. Air and rail transport is strictly prohibited. Water can be used to cool the container in case of fire, close the valve and cut off the fire source. With carbon dioxide, dry powder, dry sand fire. Water use is prohibited.
first aid measures when eye contact occurs, rinse with plenty of water and see a doctor for treatment. Skin contact with the first water rinse, and then apply magnesium oxide glycerin ointment, such as Burns should immediately see a doctor. When inhaling air, immediately move the patient to fresh air, rest and keep warm. The patient was sent to the hospital for treatment.
category hazardous gas
toxicity grade high toxicity
Acute toxicity inhalation-rat LC50: 2272 PPM
explosive hazard characteristics the steel cylinder can be exploded by heat and sunlight; The leakage releases highly toxic smoke
flammability hazard characteristics toxic fluoride smoke from combustion
storage and transportation characteristics warehouse ventilation and low temperature drying; Light loading and light unloading
fire extinguishing agent water and sand mist
Occupational Standard TWA 2.5 mg (fluorine)/m3
toxic substance data information provided by: pubchem.ncbi.nlm.nih.gov (external link)
Last Update:2024-04-29 13:40:26
SILICON (IV) FLUORIDE
Supplier List
SKYRUN INDUSTRIAL CO.,LTD
Spot supply
Product Name: Tetrafluorosilane (SiF4) Visit Supplier Webpage Request for quotation
CAS: 7783-61-1
Tel: +86 0571-86722205
Email: sales@chinaskyrun.com
Mobile: +8618958170122
QQ: 2531159185 Click to send a QQ messageSend QQ message
Wechat: chinaskyrun
SKYRUN INDUSTRIAL CO.,LTD
Spot supply
Product Name: Tetrafluorosilane (SiF4) Visit Supplier Webpage Request for quotation
CAS: 7783-61-1
Tel: +86 0571-86722205
Email: sales@chinaskyrun.com
Mobile: +8618958170122
QQ: 2531159185 Click to send a QQ messageSend QQ message
Wechat: chinaskyrun
View History
SILICON (IV) FLUORIDE
Macitentan
3',4',7-Trimethoxyflavone
  • Home
  • Product Category

© 2015, 2023 ChemBK.com All Rights Reserved | Build: 20230617001